bike stem helpppp

ok scratch my previous post
but this one
im getting a riser bar thats clamp diameter is 25mm
should i get a stem thats clamp diameter is greater than 25mm or less than 25mm?



Views: 13

▶ Reply to This

Replies to This Discussion

Permalink Reply by Thomas G. Wilhelm IV on July 22, 2010 at 3:28pm
sometimes and most bmx handlebars are 22.2mm
Permalink Reply by Luigi D. on July 22, 2010 at 7:14pm
hahah lets hope it works then
Permalink Reply by Luigi D. on July 22, 2010 at 7:39pm
ok so scratch whats above, im getting a riser bar thats clamp diameter is 25mm
should i get a stem thats clamp diameter thats greater than 25mm or less than 25mm?
Permalink Reply by Joe L on July 23, 2010 at 1:21pm
get a stem that has a clamp diameter of 25.4 mm
Permalink Reply by Thomas G. Wilhelm IV on July 23, 2010 at 2:29pm
steer-er should be either 1inch(roadbike) or 1-1/8"(trackbike) and the clamp should be the size of your handle bars
Permalink Reply by Luigi D. on July 23, 2010 at 11:34pm
awesome thanks peeeeps
i got a suelo stem Bar Clamp Diameter 22.2mm
and
Atomlab Black G.I. 22.2mm
haha hopefully that works
Permalink Reply by Thomas G. Wilhelm IV on July 24, 2010 at 12:01pm
should be perfect. any product pictures?
Permalink Reply by Luigi D. on July 24, 2010 at 4:12pm
oh yeah haha here u gooo


Permalink Reply by Thomas G. Wilhelm IV on July 27, 2010 at 5:41pm
stem looks nice and beefy. how much does it weigh?
Permalink Reply by Luigi D. on July 27, 2010 at 9:34pm
haha damn dude i jus looked at it it says shipping weight is 2.4lbs, looks heavy? i dunno, please tell me if thats heavy or not haha, cuz i really wouldnt know
Permalink Reply by Thomas G. Wilhelm IV on July 30, 2010 at 5:20pm
by beefy i meant built well and strong.
Permalink Reply by joe r on August 21, 2010 at 1:12pm
25mm clamp and bar should fit fine, if it fails get a file out and file down the edge of the stem till it fits

RSS

© 2012   Created by Fixed Gear Republic.

Badges  |  Report an Issue  |  Terms of Service